Roof Rack Brackets

To Install:

1. Position the post assembly so the two 5/16-18 fasteners are on each side of the cross bars.

2. Using the included Allen key, tighten the bottom clamp and post assembly together.
- Be sure that the metal side faces down
- Repeat for second bracket

3. Position Sportube on the cross bars so it is tight against the post assembly.
- The front post assembly MUST fall between the two handles of the Sportube

4. Slide U-bracket's onto post assembly

5. Slide post lock through the holes found on the post assembly and U-bracket and tighten lock into place.
- Use tension handle on top to tighten the U-bracket down on the Sportube
- Repeat for second bracket

To Remove:

1. Loosen the tension handle
2. Loosen the post lock and pin
3. Remove U-Bracket off of post assembly
- It is safe to leave your post assembly on your roof racks if you like and only remove the pin, lock and U-brackets.

You can use the same post assembly for both Series 1 Sportube and Series 2 Sportube, however, the U-brackets are not interchangeable.